MTL - Super Craftsman-Chapter 949 Some people still refuse to accept (Part 1)

If audio player doesn't work, press Reset or reload the page.

Without elaborating on it from the elder sister, Guo Tailai has also seen the whole picture of this factory through nano-robots.

This huge workshop is just one of them, and there is an equally huge workshop next to it, all built in accordance with the highest earthquake resistance standards. In addition, there are several small independent constant temperature and humidity high-precision processing workshops separated by several anti-vibration trenches, which is several times larger than Guo Tailai's original studio.

A large gantry crane has been installed in each of the two large workshops, and other small commonly used equipment is also in place. There is no equipment in the processing workshop, because everyone knows that even if processing equipment is needed, Guo Tailai makes it instead of purchasing it.

The entire factory area is at least ten times larger than the previous studio. The factory area is surrounded by high walls, but the two large assembly workshops have liftable channels directly leading to the airport hangar. It is clear that this is for Guo Tailai to do Some big secrets, such as the MiG 29 mentioned earlier, are they pulled away by car after finishing? It is very convenient to enter the airport hangar directly through the lift channel and take off on the runway.

However, it is usually seen that there is a road between the airport and the airport, which seems to be irrelevant. No one will know that there will be a large factory area where aircraft can be built, which is very convenient.

Guo Tailai also intends to play in the hangar after the airport is built. This time there is a safer, more secret and more convenient place. When you do things, you do n’t have to worry about anything. There is also a secret pedestrian walkway from the airport to come here. You can work here in the gesture of playing in the airport hangar. Anyway, both sides are staffed by Guo Tailai himself, which is secret enough, so don't worry about exposing something confidential.

"Send you a surprise." Sister Si smiled and looked at Guo Tailai looking around, could not help but ask: "Do you like it?"

"Like!" Guo Tailai nodded without hesitation. If he was tossing such a large piece of land or something, the movement would be great, and it would definitely attract the attention of many people, just like the airport, it was stared by many people. Sister Sister is now done through other channels, and it's easier to keep a low profile. But Guo Tailai was a little puzzled: "Sent it?"

"Yes!" Sister replied with a smile: "Aren't you paying for a MiG 29 dynamic balancing program? General Chu feels that he can't take advantage of you, so he arranged it specially."

"Thank you Uncle Chu for helping me." Guo Tailai certainly knew General Chu's kindness and readily accepted it. The completion of this plant is very important for the future cooperation between Guo Tailai and the military. Guo Tailai will not refuse at all.

The airport is still under construction. Although Xiaohui has already constructed the hangar in accordance with Guo Tailai's requirements, even if it is completed, before the whole is completed, Guo Tailai will not be able to work in the hangar in a big way. Well now, with this large factory area, you can directly let your own people take over and start working.

There are two warehouses in the factory area. One of the warehouses is already filled with materials from the military vehicles that Guo Tailai asked Lu Zhiming to prepare, while the other warehouse contains the materials needed by MiG 29. In the past few months, enough of these things have been prepared, and the rest is Guo Tailai's own life. In addition, there are a large number of various high-end raw materials, which are used to manufacture high-precision machine tools, and can be used at any time.

In addition to those commonly used equipment, the rest of the equipment needs to be made or purchased by Guo Tailai, but General Chu does not care.

The factory was registered under the name of a person arranged by General Chu. Obviously, it was an absolutely reliable person. There was absolutely nothing to do with Guo Tailai. It seemed completely dark and arranged very thoughtfully. There is even a staff dormitory in the factory compound, enough to station a company. It seems that the specific security work will be handed over to the army in the future, not just the security company.

Sister spent a day in Gu Suduo, accompanied Guo Tai to stay overnight, and left the next morning. As soon as Sister left, Guo Tailai also knew that he went out and played a large circle again, and it was time to work hard.

However, it was a bit too dazzling to go to the airport hangar for work for no apparent reason. Since there is a studio, why go to the airport hangar to work?

"Boss, didn't somebody pick the thorn when accepting the lens at the time?" Lin Jiayi knew Guo Tailai's troubles and gave Guo Tai a solution with a smile: "They don't think that the management of the studio is not standard enough. Are there any other workpieces, may debris affect the lens during processing? You said that it is necessary to standardize the management of the studio, is this not a ready reason?

"Good idea!" Guo Tailai suddenly lighted up in front of her, and gave her thumbs up.

The professor who was expelled from Harvard last time pointed his finger in the work room. One of the irregularities pointed out was that a ceramic engine was also being processed beside the large lens. The mixing of two kinds of workpieces may affect the quality of large lenses.

Of course, only Guo Tailai was working alone in the studio, and in the end, it did not cause any impact. He completed the processing task of the first large lens very well. However, it is more appropriate to explain this reason now. He signed another three large lens processing contracts, and Guo Tailai decided to standardize the management of the studio, so it is no problem to put part of the ceramic engine processing on the hangar side! It's just reasonable, it can't be more reasonable.

Just do it, Guo Tailai asked Lin Jiayi to send a notice to the project team that day, expressing some euphemistic apologies to the project team, and proactively said that all equipment in the work room that had nothing to do with processing large lenses would be removed. All work not related to the polishing of large lenses is transferred to the established hangar. The studio is purely used to process and test large lenses. It will never let any other work affect the processing of lenses.

In addition to sending notices to the project team, Guo Tailai also sent similar notices to several cooperation units of the project team, including the Huaxia Observatory. Immediately afterwards, this small standard management initiative was reported by some media outside of China. The project team also took the opportunity to publicize a wave of gratifying progress reports. Expressed appreciation.

One's studio is also willing to standardize management for quality control without hesitating to increase costs, especially Mr. T, who is famous all over the world. This can definitely boast positively.

Anyway, many people in Europe and the United States are happy to see Guo Tailai, apart from eating, drinking, playing, and caring for customers, other time is used to grind high-precision lenses. You know, the Large Magellanic Telescope Project is only one of the "Extreme Huge Telescope Project". Even if it takes more than ten years to complete several large lenses, there will be more lenses to be customized in the future!

Some orders can be given to Mr. T.